Jay Fisher - Fine Custom Knives

New to the website? Start Here
"Andromeda" obverse side view in T3 deep cryogenically treated CPM 154CM powder metal technology high molybdenum stainless steel blade, 304 stainless steel bolsters, K2 Azurite Granite gemstone handle, hand-carved leather sheath inlaid with blue rayskin
"Andromeda"

Contact Jay Fisher

Where links become bonds

The best way to contact me is through email. Here's the link to my email page. I will respond to your emails if you are seriously inquiring about a fine custom or handmade knife, sword, or project.

Want to send your inquiry, design idea, or request via United States Postal Service, FedEx, or UPS? Here's my studio address:

Jay Fisher
Sharp Instinct Studio
1405 N. Edwards
Clovis, NM 88101

Telephone numbers: I've had to remove my phone numbers from the public part of the web site, due to the high amount of unrelated traffic and inquiries. If you've already purchased one of my knives, you have my phone number. If you don't, please email me with your knife request. Thanks for your understanding.

The Studio: My Sharp Instinct Studio overlooks Dennis Chavez lake and park, at 14th Street and Edwards. Due to Fire Department Codes, the studio is not open to the general public.

Old Studio/New Studio!

New is better! My studio name (from about 1995) was "Enchanted Spirits Studio." I had this name when I was located in Magdalena, New Mexico, and kept it when I moved to Clovis, New Mexico. I chose this name because our state motto, "The Land of Enchantment." It's on every New Mexico license plate; it's on every New Mexico State quarter. New Mexico has enchanting vistas, tall mountains, stark deserts, lakes, rivers, and plains. We have a wide range of cultures, arts, and sciences, all in a very neat part of our country and world.

However, the word "enchantment" has been hijacked by the new age crowd and mystical clusters, and in the rest of the country, has become a bit of a bent and mixed-up idea. Too bad, because it really only means a very cool place to be and live. I've had people actually complain about the name, be confused about the name, and have even had visitors knock on the door and ask to "See the Shaman." REALLY.

The other part of the original name was "Spirits." A spirit is a good thing to have, but Google and the internet (which came along after my studio name) has decided that the word "spirits" means that I obviously sell liquor. Yep, phone calls in the middle of the night requesting kegs of whiskey and special brands of alcohol were just ridiculous. I still receive catalogs for liquor sales items, mugs, counter displays, handouts for all my drinking customers... ahem.

So new for 2020, I changed the name of the studio to "Sharp Instinct Studio." This should erase the issues of the previous studio name, and describes what I believe it takes to make knives, a sharp instinct for lines, design, fit, finish, materials, and history. After doing this for over 40 years, I realize that instinct plays a role in what makes a good knife great, what makes an idea become a work of functional art.

I'll be posting new photos of the studio, the sign, and any new information here to keep everybody current. It's still the same place, about 3000 square feet of workplace and art studio, in the same location, by the same guy. Only the studio name has changed... not the idea or the creations.

The Old Studio:

Enchanted Spirits Studio, overlooking Dennis Chavez Park 1405 Edwards, Clovis, NM 88101 - Enchanted Spirits Studio

Welcome to the New Sharp Instinct Studio!

Sharp Instinct Studio, 1405 N. Edwards St., Clovis New Mexico, USA

I'll post more photos as the rebuild is underway. In the photo above, we've just completed the mounting of the new sign and the front painting. Still have some window works to do, but it's all looking pretty good so far!

I couldn't have done this without the help of mainly Donnie Land, and also the help of Hunter Plant. These guys came through to speed up the process, with great ideas and some real fun in the process.

In the photo above, Donnie is applying the final row of screws to the drip plate. The letters are hot-formed molded acrylic, coated with UV protection. They're mounted with stainless steel studs through a background of blue foam PVC board, which is screwed to sheets of exterior grade plywood. The plywood is treated with UV blocking and hardening preservative, and the ply is bolted to the angle iron frame I welded in place. The frame is bolted to the building with 1/2" all-thread rod, completely through the cinder block. The sign is 20.5' long and 3' tall.

The lower part of the sign is covered in aluminum flashing, and I'll mount the address there in acrylic later. The top of the sign and the edges are covered in 4" x 6" galvanized flashing, to prevent any water from reaching the plywood. This also frames in the blue board. We used a ton of stainless steel truss head screws, everything that is exposed is protected or immune from corrosion.

You might wonder why this thing is so sturdy, and that's hard for a lot of people to believe. Where I live, we get "normal and typical" springtime winds of over 70 miles per hour. Yep, it's true. The Llano Estacado has nothing to stop straight-line winds, and they happen without a tornado, storm, or weather event. People in other locations panic when they get 30 MPH gusts, and that's just a breeze here. It isn't always windy; most days are pleasant and mild. This photo above was taken on the 21st of December, the first day of winter! Note Donnie's short sleeves: 65° and mild!

Remember how I mentioned straight-line winds of over 70 MPH? Note the wire stays on the evaporative cooler and the heater vent. I'm working hard for a new roof for the facility this year; fingers crossed! I'll finish the windows and do some landscaping as spring approaches.

More coming; check back for current updates!

Learn more about my background here.

I’m lucky to have been blessed with the vision of wonder and creation. Art is not subjective, or objective; art is interactive. You are the key, the parity to my equation. Thank you for your interest and patronage!

 


XHTML 1.0 Validated, Compliant, Link Checked, and CSS Level 2.1 Validated through W3C, the World Wide Web Consortium
Main Purchase Tactical Specific Types Technical More
Home Page Where's My Knife, Jay? Current Tactical Knives for Sale The Awe of the Blade Knife Patterns My Photography
Website Overview Current Knives for Sale Tactical, Combat Knife Portal Museum Pieces Knife Pattern Alphabetic List Photographic Services
My Mission My Knife Prices All Tactical, Combat Knives Investment, Collector's Knives Copyright and Knives Photographic Images
The Finest Knives and You How To Order Counterterrorism Knives Daggers Knife Anatomy  
Featured Knives: Page One Purchase Finished Knives  Professional, Military Commemoratives Swords Custom Knives  
Featured Knives: Page Two Order Custom Knives USAF Pararescue Knives Folding Knives Modern Knifemaking Technology My Writing
Featured Knives: Page Three Knife Sales Policy USAF Pararescue "PJ- Light" Chef's Knives Factory vs. Handmade Knives First Novel
Featured Knives: Older/Early Bank Transfers  27th Air Force Special Operations  Food Safety, Kitchen, Chef's Knives Six Distinctions of Fine Knives Second Novel
Email Jay Fisher Custom Knife Design Fee Khukris: Combat, Survival, Art Hunting Knives Knife Styles Knife Book
Contact, Locate Jay Fisher Delivery Times Serrations Working Knives Jay's Internet Stats  
FAQs My Shipping Method Grip Styles, Hand Sizing Khukris The 3000th Term Videos
Current, Recent Works, Events Business of Knifemaking Concealed Carry and Knives Skeletonized Knives Best Knife Information and Learning About Knives  
Client's News and Info   Military Knife Care Serrations Cities of the Knife Links
Who Is Jay Fisher?   The Best Combat Locking Sheath Knife Sheaths Knife Maker's Marks  
Testimonials, Letters and Emails     Knife Stands and Cases How to Care for Custom Knives Site Table of Contents
Top 22 Reasons to Buy   Tactical Knife Sheath Accessories Handles, Bolsters, Guards Knife Making Instruction  
My Knifemaking History   Loops, Plates, Straps Knife Handles: Gemstone Larger Monitors and Knife Photos  
What I Do And Don't Do    Belt Loop Extenders-UBLX, EXBLX Gemstone Alphabetic List New Materials  
CD ROM Archive   Independent Lamp Accessory-LIMA Knife Handles: Woods Knife Shop/Studio, Page 1  
Publications, Publicity   Universal Main Lamp Holder-HULA Knife Handles: Horn, Bone, Ivory Knife Shop/Studio, Page 2  
My Curriculum Vitae   Sternum Harness Knife Handles: Manmade Materials    
Funny Letters and Emails, Pg. 1 Blades and Steels Sharpeners, Lanyards Knife Embellishment     
Funny Letters and Emails, Pg. 2 Blades Bags, Cases, Duffles, Gear    
Funny Letters and Emails, Pg. 3 Knife Blade Testing Modular Sheath Systems  
Funny Letters and Emails, Pg. 4 440C: A Love/Hate Affair PSD Principle Security Detail Sheaths      
Funny Letters and Emails, Pg. 5 ATS-34: Chrome/Moly Tough
Funny Letters and Emails, Pg. 6 D2: Wear Resistance King        
The Curious Case of the "Sandia" O1: Oil Hardened Blued Beauty        
The Sword, the Veil, the Legend Elasticity, Stiffness, Stress,
and Strain in Knife Blades
   
Professional Knife Consultant Heat Treating and
Cryogenic Processing of
Knife Blade Steels